Troubleshooting · Care guide
AC Water Leaking From the Indoor Unit? 7 Causes and How to Fix Them
Technician Technical Team · 17 November 2026

Water dripping from a split AC is one of the most common complaints in Bangladesh, especially in the humid months. Here's why it happens and how to stop it.
Water dripping from the indoor unit of a split AC is one of the most common complaints we hear from customers in Dhaka and across Bangladesh, especially during the humid monsoon months. It can stain walls, damage furniture and, if it reaches electrical sockets, become a safety risk.
The good news is that most leaks have a simple cause. An air conditioner removes moisture from the air as it cools. That water collects on the cold evaporator coil, drips into a drain tray and flows out through a drain pipe. When any part of that path is blocked or out of position, water ends up inside your room instead.
1. A blocked drain pipe
This is the most frequent cause. Dust, algae and slime build up inside the drain pipe over time, particularly if the AC has not been serviced for a season. Once the pipe is blocked, the drain tray overflows and water drips from the front or bottom of the indoor unit. A technician can flush or blow out the pipe and clean the tray.
2. A dirty air filter
When the filter is clogged, less warm air passes over the evaporator coil. The coil gets too cold and can freeze. When the ice melts, more water arrives than the tray can handle. In heavy use, rinse the filters every two weeks with plain water and let them dry fully before refitting.
3. The indoor unit is not level
The drain tray relies on gravity. If the indoor unit was mounted tilted towards the back or the wrong side, water pools at the wrong end of the tray and spills over. This is common after a rushed installation or after the wall bracket loosens. Re-levelling the unit fixes it.
4. Wrong slope on the drain pipe
The drain pipe must slope downward all the way to its outlet. A pipe that rises, sags or is crushed behind furniture traps water. Check that the outlet outside is not submerged in a bucket or blocked by a plant pot.
5. Low refrigerant
If refrigerant has leaked out, pressure in the coil drops and the coil can ice over. You may notice weak cooling, ice on the copper pipes, and water dripping after the AC is switched off. Low refrigerant always means there is a leak, so the leak must be found and repaired, not simply topped up.
6. A cracked or rusted drain tray
Older units can develop cracks in the drain tray. Water then escapes before it ever reaches the drain pipe. The tray needs repair or replacement.
7. Sweating pipes and poor insulation
In very humid weather, uninsulated or badly insulated copper pipes and drain lines can collect condensation on the outside and drip along the wall. Replacing damaged insulation solves this.
What you can safely check yourself
Switch the AC off at the wall before touching anything. Remove and wash the filters. Look at the drain outlet outside and make sure water can flow out freely. Check that the indoor unit looks level. Do not open covers, touch wiring or attempt to add refrigerant yourself.
When to call a technician
Call a professional if water keeps dripping after you clean the filters, if you see ice on the pipes, if cooling is weak, or if water is reaching sockets or switchboards. A hydro-clean or full dismantle cleaning service clears the drain tray, coil and pipe in one visit and usually solves leaks caused by dirt.
Book a verified technician
Technician sends verified, trained technicians to homes and offices across our service areas. Book online or call our hotline, choose a time slot that suits you, and the technician will explain the problem and the cost before any repair work begins. Every service visit is backed by our service warranty.
Keep reading

Microwave Oven Not Heating? 10 Common Problems, Causes, and Solutions

