Troubleshooting · Care guide
Washing Machine Not Draining or Spinning? What to Check First
Technician Technical Team · 17 November 2026

A washing machine full of water is a common and stressful problem. Many causes are simple to check before you call for a repair.
A washing machine that won't drain or spin leaves you with a drum full of water and wet clothes. The cause is often simple, and you can check several things safely before booking a repair.
Always switch off and unplug the machine before checking anything, and be ready with towels and a shallow container, because water may come out.
1. A blocked drain filter
Many front-load and some top-load machines have a drain filter or coin trap, usually behind a small panel at the bottom front. Coins, hair clips, buttons and lint collect here and block the water. Check your manual, place a container underneath, open the filter slowly and clean it.
2. A kinked or blocked drain hose
Check that the drain hose isn't bent, squashed behind the machine or blocked. Make sure the end isn't pushed too far into the drain pipe and that the drain itself isn't clogged.
3. The door or lid isn't locking
Machines won't spin unless the door or lid is fully closed and locked. Make sure nothing is caught in the door, and that the lid closes firmly. A faulty door lock or lid switch needs replacement.
4. An unbalanced or overloaded drum
If heavy items like a bedsheet or a single towel bunch to one side, the machine may refuse to spin to avoid damage. Redistribute the load and try a spin-only cycle. Avoid overloading beyond the machine's rated capacity.
5. Low water pressure affecting the cycle
In many Dhaka buildings, water pressure varies through the day. If the machine takes too long to fill, the cycle may pause or show an error before reaching the spin stage. Check that the inlet tap is fully open and the inlet filter isn't blocked.
Faults that need a technician
If the drain filter and hose are clear but the machine still won't drain, the drain pump may be faulty or blocked internally. If it drains but won't spin, the cause may be a worn drive belt in some top-load models, a motor fault, or a control board problem. Error codes on the display can help a technician diagnose the issue faster, so note them down.
Prevent future problems
Check pockets before washing, clean the drain filter regularly, don't overload the drum, use the correct amount of detergent, and leave the door open after washing so the drum can dry and doesn't develop odours.
Book a verified technician
Technician sends verified, trained technicians to homes and offices across our service areas. Book online or call our hotline, choose a time slot that suits you, and the technician will explain the problem and the cost before any repair work begins. Every service visit is backed by our service warranty.
Keep reading

AC Water Leaking From the Indoor Unit? 7 Causes and How to Fix Them

Microwave Oven Not Heating? 10 Common Problems, Causes, and Solutions
